Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.968 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 35 g/10min |
| Shrinkage rate | | ASTM D955 | 1.3 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Hardness (Shore) | | ISO 868 | 69 |
| Hardness (Shore) | | ISO 868 | 64 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Burning wire flammability index | | AS/NZS60695.2.12 | 550 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790 | 1800 MPa |
| bending strength | | ASTM D790 | 38.0 MPa |
| tensile strength | | ASTM D638 | 27.0 MPa |
| elongation | | ASTM D638 | 100 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 60 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 850 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Hot deformation temperature (HDT) | | ASTM D648 | 125 °C |
| Hot deformation temperature (HDT) | | ASTM D648 | 60.0 °C |
| | ASTM D696 | 1E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare