Epoxy 360T Epoxy Technology Inc.

Typical Applications:

Electrical and electronic applications medical and nursing supplies

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Electrical and electronic applications | medical and nursing supplies

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	23°C		>2.0E+13	ohms·cm
Dissipation factor	1kHz		0.014
LapShearStrength	23°C		13.8	MPa
Shore hardness	ShoreD		75
Relative permittivity	1kHz		3.84
Uncured Properties	Test Condition	Test Method	Test Result	Test Unit
density	Pot Life		240	min
	density	固化时间(150°C)		1.0	hr
		density	粘度7(23°C)		4.0to6.0	Pa·s
			density	PartA		1.16	g/cm³
			density	density	PartB		1.02	g/cm³
Color	--6		Tan
Color	Color	--5		Amber
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	按重量计算的混合比		100
	Thermosetting components	Shelf Life(23°C)		26	wk
	Thermosetting components	Thermosetting components	PartB		按重量计算的混合比:10
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD：--4		1.5E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：--3		5.3E-05	cm/cm/°C
Glass transition temperature			>80.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Particle size distribution			<20.0	µm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
weight loss on heating	200°C		0.59	%
operate temperature	ThixotropicIndex		5.10
	operate temperature	StorageModulus(23°C)		2.19	GPa
		operate temperature	Intermittent		-55-275	°C
		operate temperature	operate temperature	Continuous		-55-175	°C
Shear Strength	23°C		23.4	MPa
DegradationTemperature			341	°C
weight loss on heating	250°C		1.8	%
weight loss on heating	weight loss on heating	300°C		4.3	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top