
PC TRISTAR® PC-10FR-(VIM) PTS USA
Typical Applications:
Electrical and electronic applications communication equipment
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical and electronic applications | communication equipment |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 750 | J/m |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 3.0mm | UL 94 | V-0 | |
| Burning wire flammability index | IEC 60695-2-12 | 960 | °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 775 | °C | |
| UL flame retardant rating | 1.5mm | UL 94 | V-1 | |
| Extreme Oxygen Index | ASTM D2863 | 37 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | Yield,3.17mm | ASTM D638 | 55.0 | MPa |
| Bending modulus | 3.17mm | ASTM D790 | 2070 | MPa |
| bending strength | Yield,3.17mm | ASTM D790 | 86.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 137 | °C |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 7E-05 | cm/cm/°C |
| TD:-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C | |
| RTI Elec | UL 746 | 125 | °C | |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 135 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 127 | °C | |
| RTI Imp | UL 746 | 115 | °C | |
| RTI | UL 746 | 125 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792 | 1.23 | g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 12 | g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.18 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| High arc combustion index | 1.50mm | UL 746 | PLC 0 | |
| 3.00mm | UL 746 | PLC 0 | ||
| 1.5mm | UL 746 | PLC 0 | ||
| 3.0mm | UL 746 | PLC 1 | ||
| High voltage arc tracing rate | HVTR | UL 746 | PLC 4 | mm/min |
| HVTR | UL 746 | PLC 3 | ||
| Hot wire ignition | 1.50mm | UL 746 | PLC 2 | sec |
| 3.00mm | UL 746 | PLC 1 | sec | |
| 1.5mm | UL 746 | PLC 3 | ||
| 3.0mm | UL 746 | PLC 2 | ||
| Arc resistance | ASTM D495 | 60.0to120 | sec | |
| ASTM D495 | PLC6 | |||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 1 | |
| CTI | UL 746 | PLC 2 | ||
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.