FEP Dyneon™ 6307Z 3M USA
33
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | > 95 % | |
| UL flame retardant rating | UL 94 | V-0 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Bending modulus | ASTM D790 | 580 Mpa | |
| elongation | Break, 23°C | ASTM D638 | 350 % |
| tensile strength | Break, 23°C | ASTM D638 | 25.0 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melting temperature | ASTM D-1523 | 260 °C | |
| Brittle temperature | ASTM D746 | < -70.0 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 372°C/5.0 kg | ASTM D1238 | 7.0 g/10 min |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dissipation factor | 1 MHz | ASTM D150 | 7.0E-4 |
| 1 kHz | ASTM D150 | < 3.0E-4 | |
| Dielectric constant | 1 MHz | ASTM D150 | 2.15 |
| 1 kHz | ASTM D150 | 2.15 | |
| Dielectric strength | 0.114 mm | ASTM D149 | 100 KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.