Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.41 g/cm³ |
| melt mass-flow rate | | ISO1133 | 3.0 g/10min |
| Shrinkage rate | | 内部方法 | 2.2 % |
| Water absorption rate | | ISO62 | 0.20 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Bending stress | | ISO178 | 83.0 Mpa |
| Tensile modulus | | ISO527-2 | 2600 Mpa |
| Tensile stress | | ISO527-2 | 63.0 Mpa |
| Tensile strain | | ISO527-2 | 10 % |
| Tensile strain | | ISO527-2 | 40 % |
| Flexural modulus | | ISO178 | 2400 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 6.5 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+16 ohms |
| Volume resistivity | | IEC60093 | 1E+14 ohms·cm |
| dielectric strength | | IEC60243-1 | 19 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 96.0 °C |
| melting temperature | | ISO11357-3 | 165 °C |
| | ISO11359-2 | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices