POM S1320-0021 BASF GERMANY

Form：Granules

Properties:

High impact resistanceenhance

Typical Applications:

Automotive ApplicationsToy

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Toy
Properties:	High impact resistance \| enhance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	5.5	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.5	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	170	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	170	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level	1.6mm	IEC 60695-11-10,-20	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile creep modulus	1000hr	ISO 899-1	1450	Mpa
Tensile modulus		ISO 527-2	3000	Mpa
tensile strength	Yield	ISO 527-2/50	66.0	Mpa
Tensile strain	Yield	ISO 527-2/50	9.0	%
Nominal tensile fracture strain		ISO 527-2/50	30	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	100	°C
Melting temperature		ISO 11357-3	171	°C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	1.1E-04	cm/cm/°C
Maximum operating temperature	短周期操作		100	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.41	g/cm³
Apparent density			0.85	g/cm³
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	11.0	cm3/10min
Shrinkage rate	TD	ISO 294-4	2.1	%
Shrinkage rate	Shrinkage rate	MD	ISO 294-4	2.1	%
Water absorption rate	Saturation,23°C	ISO 62	0.80	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+15	ohms
Volume resistivity		IEC 60093	1E+14	ohms·cm
Dielectric strength		IEC 60243-1	85	KV/mm
Relative permittivity	1MHz	IEC 60250	3.70
Dissipation factor	1MHz	IEC 60250	5E-03
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test	H358/30	ISO 2039-1	155	Mpa
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ISOType		ISO 9988-1	POM-K.M-GNR.04-002

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top