ABS

ABS POLYLAC® PA-705 ZHENJIANG CHIMEI

Properties:
High mobilityHigh gloss
Usages:
Lighting fixturesCastersOffice suppliesAutomotive sectorElectronic fieldElectrical field
Certificates:
UL
Compare View Prices

Technical Data Sheet

other	Test Condition	Test Method	Test Result
characteristic			高刚性中冲击

Basic Performance	Test Condition	Test Method	Test Result
melt mass-flow rate	200℃，5kg	ASTM D-1238	2.7 g/10min
density	23℃	ASTM D-792	1.03

mechanical properties	Test Condition	Test Method	Test Result
Rockwell hardness	1/2"	ASTM D-785	110 R scale
Impact strength of cantilever beam gap	1/4"，23℃	ASTM D-256	16(3.0) kg-cm/cm(ft-lb/in)
tensile strength	1/8"，6mm/min	ASTM D-638	450(6380) kg/cm2(lb/in2)
Elongation at Break	1/8"，6mm/min	ASTM D-638	20 %
Bending modulus	1/4"，2.8mm/min	ASTM D-790	24000(340000) kg/cm2
bending strength	1/4"，2.8mm/min	ASTM D-790	680(9650) kg/cm2(lb/in2)
Impact strength of cantilever beam gap		ASTM D256/ISO 179	18(3.3) kg·cm/cm(J/M)ft·lb/in
tensile strength		ASTM D638/ISO 527	450（6.380） kg/cm²(MPa)[Lb/in²]
elongation		ASTM D638/ISO 527	35 %
Rockwell hardness		ASTM D785	R-110
Bending modulus		ASTM D790/ISO 178	1800（25500） kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	540（7.650） kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gap		ASTM D256/ISO 179	20(3.7) kg·cm/cm(J/M)ft·lb/in

thermal performance	Test Condition	Test Method	Test Result
Vicat softening temperature	1/8"，50℃/hr	ASTM D-1525	104(219) ℃（℉）
Hot deformation temperature	1/4"，50℃/hr	ASTM D-648	98(209) ℃（℉）
Burning rate	1/16"	UL 94	HB
Combustibility (rate)		UL 94	1/16"HB
Hot deformation temperature	HDT	ASTM D648/ISO 75	98（208） ℃（℉）
Hot deformation temperature	Hot deformation temperature	HDT	ASTM D648/ISO 75	87（189） ℃（℉）
Vicat softening temperature		ASTM D1525/ISO R306	104（219） ℃（℉）

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.05
melt mass-flow rate		ASTM D1238/ISO 1133	2.7 g/10min
melt mass-flow rate	melt mass-flow rate		ASTM D1238/ISO 1133	27 g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

ABS POLYLAC® PA-705 ZHENJIANG CHIMEI

Technical Data Sheet

You May Like