Share
Add to Compare

PA66 A 20 V35 TECNICA ITALY

72

Form:Granules | Grade:Enhanced level

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Impact strength of simply supported beam without notch-30°CISO 179/1eU55kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU60kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
UL flame retardant rating0.8 mmUL 94V-0
UL flame retardant rating1.6 mmUL 94V-0
UL flame retardant rating3.2 mmUL 94V-0
Burning wire flammability index0.8 mmIEC 60695-2-12960°C
Burning wire flammability index1.6 mmIEC 60695-2-12960°C
Burning wire flammability index3.2 mmIEC 60695-2-12960°C
Hot filament ignition temperature1.6 mmIEC 60695-2-13725°C
Extreme Oxygen IndexISO 4589-231%
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile modulus23°CISO 527-2/1A12500Mpa
tensile strengthBreak, 23°CISO 527-2/1A175Mpa
Tensile strainBreak, 23°CISO 527-22.1%
Bending modulus23°CISO 17811000Mpa
bending strength23°CISO 178260Mpa
injectionTest ConditionTest MethodTest ResultTest Unit
drying temperature80°C
Suggested maximum moisture content0.20%
Temperature at the rear of the barrel265 to 275°C
Temperature in the middle of the barrel270 to 280°C
Temperature at the front of the material cylinder280 to 290°C
Mold temperature60 to 90°C
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Hot deformation temperature1.8 MPa, UnannealedISO 75-2/Af244°C
Melting temperatureISO 11357-3263°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
Water absorption rate24 hr, 23°CISO 620.60%
Water absorption rateEquilibrium, 23°C, 50% RHISO 621.7%
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Surface resistivityIEC 600931.0E+14ohms
Volume resistivityIEC 600931.0E+15ohms·cm
Dielectric strength0.800 mmIEC 60243-132KV/mm
Relative permittivityIEC 602503.40
Dissipation factorIEC 602500.020
Compared to the anti leakage trace indexSolution AIEC 60112PLC 1
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index

+86 0755 27873515

Room 906, Global Digital Building, No. 9 Gaoxin Middle 3rd Road, Maling Community, Yuehai Subdistrict, Nanshan District, Shenzhen, Guangdong Province, China