PA6 A1025 UNITIKA JAPAN

Form：Granules | Grade：Flame retardant grade

Typical Applications:

Electrical enclosureApplication in the automotive fieldParts under the hood of a carVehicle electronicsArchitectural application field

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Electrical enclosure | Application in the automotive field | Parts under the hood of a car | Vehicle electronics | Architectural application field

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch		kJ/m²	35	51
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm		V-0	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		MPa	110	60.0
Bending modulus		MPa	3000	1500
Tensile strain	Break	%	3.4	4.0
tensile strength	Break	MPa	77.0	41.0
Tensile modulus		MPa	3100	1800
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	cm/cm/°C	1E-04	1E-04
Hot deformation temperature	1.8MPa,Unannealed	°C	66.0	--
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	°C	170	--
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:3.20mm	%	1.5	1.5
Water absorption rate	Equilibrium,23°C,50%RH	%	1.9	1.9
Water absorption rate	Water absorption rate	23°C,24hr	%	1.2	1.2
Shrinkage rate	MD:3.20mm	%	1.1	1.1
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz		0.010	--
Dielectric constant	1MHz		3.00	--
Dielectric strength	1.00mm	kV/mm	25	--
Volume resistivity		ohms·cm	1E+16	--
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale		116	97

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top