LDPE+HDPE SILVER® PE 1011.MH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 0.928到0.948 g/cm³ | ||
| melt mass-flow rate | <1.0 g/10min | ||
| Resistance to environmental stress cracking | >500 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | >14.0 MPa | ||
| >13.0 MPa | |||
| elongation | >500 % | ||
| >600 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength | -25到25 % | ||
| Change rate of ultimate elongation | -25到25 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric strength | >25 kV/mm | ||
| Volume resistivity | >1.0E+6 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | <-76.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top