Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Melt volume flow rate | | cm³/10min | 0.04to0.05 |
flow | | mm/mm | 152.4E-3-172.7E-3 |
optical performance | Test Condition | Test Method | Test Result |
---|
transmissivity | | % | 88.9to93.1 |
Haze ratio | | % | 0.20to3.1 |
flammability | Test Condition | Test Method | Test Result |
---|
burning rate | | mm/min | 38.1to53.34 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
yield | | | 24.41to54.0 Mpa |
yield | | | 1.03to33.45 Mpa |
Nominal tensile fracture strain | | % | 2.5to500 |
fracture | | | 14.0to64.0 Mpa |
fracture | | % | 30to260 |
yield | | % | 2.0to2.1 |
yield | | | 4.0to51.03 Mpa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | J/m | 0.007to0.037 |
Dart impact | | N.m | 47.17to3256.64 |
Charpy Notched Impact Strength | | kJ/m² | 0.353to2.182 |
aging | Test Condition | Test Method | Test Result |
---|
Maximum continuous use temperature | | °C | 150to170 |
| Test Condition | Test Method | Test Result |
---|
yield | | | 1.7to33.03 Mpa |
fracture | | % | 400to890 |
compression set | | % | 18to36 |
fracture | | | 3.97to20.34 Mpa |
fracture | | % | 550to850 |
Thermal performance | Test Condition | Test Method | Test Result |
---|
brittle temperature | | °C | -60--59 |
Heat distortion temperature | | °C | 59to62 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.