Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | | ISO 294-4 | 0.60 % |
Shrinkage rate | | ISO 294-4 | 0.12 % |
flammability | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL 94 | V-0 |
UL flame retardant rating | | UL 94 | V-0 |
Limiting Oxygen Index | | ISO 4589-2 | 51 % |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of simply supported beam without notch | | ISO 179/1eU | 40 kJ/m² |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Tensile modulus | | ISO 527-2/1A/1 | 15000 Mpa |
tensile strength | | ISO 527-2/1A/5 | 145 Mpa |
Tensile strain | | ISO 527-2/1A/5 | 2.0 % |
Flexural modulus | | ISO 178 | 12800 Mpa |
bending strength | | ISO 178 | 220 Mpa |
compression stress | | ISO 604 | 133 Mpa |
Electrical performance | Test Condition | Test Method | Test Result |
---|
relative permittivity | | 内部方法 | 4.27 |
Dissipation Factor | | IEC 60250 | 0.031 |
Dissipation Factor | | 内部方法 | 6E-03 |
Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 3 |
Surface Resistivity | | IEC 60093 | >1.0E+15 ohms |
Volume resistivity | | IEC 60093 | >1.0E+15 ohms·cm |
dielectric strength | | IEC 60243-1 | 34 KV/mm |
relative permittivity | | IEC 60250 | 4.00 |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ISO 75-2/A | 280 °C |
melting temperature | | ISO 11357-3 | 335 °C |
Linear coefficient of thermal expansion | | ISO 11359-2 | 5E-06 cm/cm/°C |
Linear coefficient of thermal expansion | | ISO 11359-2 | 6.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.