PA6 E2
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-955 | 1.1 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.13 g/cm3 | |
| Water absorption rate | ASTM D-570 | 2.8 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785 | 100 | |
| tensile yield strength | ASTM D-638 | 90.3 MPa | |
| tensile elongation at break | ASTM D-638 | 70 % | |
| Flexural modulus | ASTM D-790 | 2830 MPa | |
| bending strength | ASTM D-790 | 115 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 58.7 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+13 ohm·cm | |
| dielectric strength | ASTM D-149 | 18 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-648 | 76.7 ℃ | ||
| ASTM D-648 | 178 ℃ | ||
| Linear expansion coefficient - Flow | ASTM D-696 | 0.000083 cm/cm/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top