Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.20 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 3.0 g/10min |
| Water absorption rate | Equilibrium | ASTMD570 | 0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 2070 MPa |
| bending strength | | ASTMD790 | 68.9 MPa |
| Itself - Dynamic | ASTMD1894 | 0.64 |
| Tensile modulus | | ASTMD638 | 37.9 MPa |
| Tensile modulus | | ASTMD638 | 20.3 MPa |
| tensile strength | | ASTMD638 | 51.7 MPa |
| elongation | | ASTMD638 | 290 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ASTMD412 | 37.9 MPa |
| tensile strength | Yield | ASTMD412 | 62.1 MPa |
| elongation | Yield | ASTMD412 | 250 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | 17 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | | 191到221 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare