CPE Pujie CPE-3611
0
- Usages:Plastic modification
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Apparent density | ASTMD1895 | >0.50 g/cm³ | |
| melt mass-flow rate | 40 g/10min | ||
| chlorinity | 35.0 wt% | ||
| SieveResidue | >98 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore A | <75 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volatility | <0.40 % | ||
| Thermal decomposition temperature | >175 °C | ||
| Impurities | <25.0 pcs/50g | ||
| Whiteness-E | >90.0 ° |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | >6.00 MPa | ||
| elongation | Break | >700 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Fusion heat | 16.0到24.0 J/g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top