PC 2807 550115 COVESTRO SHANGHAI

Form：Granules

Properties:

Weather resistanceUV resistanceMedium viscosity

Typical Applications:

Electrical fieldElectronic fieldAutomotive sectorIndustrial componentscurrency

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical field \| Electronic field \| Automotive sector \| Industrial components \| currency
Properties:	Weather resistance \| UV resistance \| Medium viscosity

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity	3000μm	ISO 14782	<0.80	%
transmissivity	4000μm	ISO 13468-2	87.0	%
Refractive index		ISO 489	1.586
transmissivity	1000μm	ISO 13468-2	89.0	%
	transmissivity	3000μm	ISO 13468-2	88.0	%
	transmissivity	transmissivity	2000μm	ISO 13468-2	89.0	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C,Partial Break	ISO 7391	75	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C,Complete Break	ISO 7391	14	kJ/m²
Impact strength of cantilever beam gap	23°C,Partial Break	ISO 7391	70	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-30°C,Complete Break	ISO 7391	15	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-60°C	ISO 179/1eU	NoBreak
Multi axis Instrumented Peak Impact Force	23°C	ISO 6603-2	5400	N
Multi axis Instrumented Peak Impact Force	Multi axis Instrumented Peak Impact Force	-30°C	ISO 6603-2	6300	N
Multi axis Instrumented Impact Energy	-30°C	ISO 6603-2	65.0	J
Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy	23°C	ISO 6603-2	60.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
Needle flame test	MethodF:2.00mm	IEC 60695-11-5	1.0	min
	Needle flame test	MethodK:2.00mm	IEC 60695-11-5	0.1	min
		Needle flame test	MethodF:3.00mm	IEC 60695-11-5	2.0	min
		Needle flame test	Needle flame test	MethodK:1.50mm	IEC 60695-11-5	0.1	min
GlowWireTest	3.00mm	EDFHN60E.02	750	°C
Needle flame test	MethodF:1.50mm	IEC 60695-11-5	1.0	min
UL flame retardant rating	2.5mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	0.75mm	UL 94	V-2
Burning wire flammability index	0.75mm	IEC 60695-2-12	850	°C
	Burning wire flammability index	1.5mm	IEC 60695-2-12	850	°C
	Burning wire flammability index	Burning wire flammability index	3.0mm	IEC 60695-2-12	930	°C
Hot filament ignition temperature	0.75mm	IEC 60695-2-13	875	°C
	Hot filament ignition temperature	1.5mm	IEC 60695-2-13	875	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	875	°C
Extreme Oxygen Index		ISO 4589-2	28	%
Needle flame test	MethodK:3.00mm	IEC 60695-11-5	0.2	min
SelfIgnition		ASTM D1929	550	°C
FlashIgnitionTemperature		ASTM D1929	480	°C
GlowWireTest	1.50mm	EDFHN60E.02	750	°C
Burning rate - US-FMVSS	>1.00mm	ISO 3795	passed
ApplicationofFlamefromSmallBurner MethodKandF	2.00mm	DIN 53438-1,-3	K1.F1
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield,23°C	ISO 527-2/50	6.1	%
Tensile strain	Tensile strain	Break,23°C	ISO 527-2/50	130	%
tensile strength	Yield,23°C	ISO 527-2/50	66.0	Mpa
Tensile creep modulus	1000hr	ISO 899-1	1900	Mpa
Tensile creep modulus	Tensile creep modulus	1hr	ISO 899-1	2200	Mpa
Nominal tensile fracture strain	23°C	ISO 527-2/50	>50	%
tensile strength	Break,23°C	ISO 527-2/50	70.0	Mpa
bending strength	3.5%Strain,23°C	ISO 178	74.0	Mpa
Bending modulus	23°C	ISO 178	2400	Mpa
bending strength	23°C	ISO 178	98.0	Mpa
Bending strain	23°C	ISO 178	7.0	%
Tensile modulus	23°C	ISO 527-2/1	2400	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Imp	1.5mm	UL 746	115	°C
RTI Str	1.5mm	UL 746	125	°C
Vicat softening temperature	--	ISO 306/B120	145	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	143	°C
Glass transition temperature		ISO 11357-2	144	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	124	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	136	°C
RTI Elec	1.5mm	UL 746	125	°C
thermal conductivity	23°C	ISO 8302	0.20	W/m/K
Linear coefficient of thermal expansion	TD：23to55°C	ISO 11359-2	6.5E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	6.5E-05	cm/cm/°C
Ball Pressure Test	135°C	IEC 60695-10-2	Pass
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	23°C	ISO 1183	1.20	g/cm³
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.12	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	0.30	%
Shrinkage rate	MD:2.00mm3	ISO 294-4	0.65	%
	Shrinkage rate	TD:2.00mm3	ISO 294-4	0.70	%
	Shrinkage rate	Shrinkage rate	MD	ISO 2577	0.60-0.80	%
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	9.00	cm3/10min
Shrinkage rate	TD	ISO 2577	0.60-0.80	%
Apparent density		ISO 60	0.66	g/cm³
melt mass-flow rate	300°C/1.2kg	ISO 1133	10	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+16	ohms
Compared to the anti leakage trace index	SolutionA	IEC 60112		V
Dielectric strength	23°C,1.00mm	IEC 60243-1	34	KV/mm
Relative permittivity	23°C,100Hz	IEC 60250	3.10
Relative permittivity	Relative permittivity	23°C,1MHz	IEC 60250	3.00
Dissipation factor	23°C,100Hz	IEC 60250	5E-04
Dissipation factor	Dissipation factor	23°C,1MHz	IEC 60250	9E-03
Volume resistivity	23°C	IEC 60093	1E+16	ohms·cm
Compared to the anti leakage trace index	SolutionB	IEC 60112	PLC 4
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	115	Mpa
film	Test Condition	Test Method	Test Result	Test Unit
Water vapor permeability	23°C,85%RH,100μm	ISO 15106-1	15	g/m²/24hr
GasPermeation	CarbonDioxide:23°C,25.4μm	ISO 2556	16900	cm³/m²/bar/24hr
	GasPermeation	Oxygen:23°C,100.0μm	ISO 2556	650	cm³/m²/bar/24hr
		GasPermeation	Oxygen:23°C,25.4μm	ISO 2556	2760	cm³/m²/bar/24hr
			GasPermeation	Nitrogen:23°C,100.0μm	ISO 2556	120	cm³/m²/bar/24hr
				GasPermeation	Nitrogen:23°C,25.4μm	ISO 2556	510	cm³/m²/bar/24hr
				GasPermeation	GasPermeation	CarbonDioxide:23°C,100.0μm	ISO 2556	3800	cm³/m²/bar/24hr
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Electrolytic corrosion	23°C	IEC 60426	A1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top