Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 0.2/0.9 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO 1133 | 17 CM |
| Melt flow temperature | | | 260-280 °C |
| density | | ISO 1183 | 1.68 g/cm |
| Water absorption rate | | DIN 53495/1L | 0.4 % |
| Water absorption rate | | | 0.2 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 10 KJ/m |
| Tensile modulus | | ISO 527-2 | 11700 Mpa |
| Tensile stress | | ISO 527-2 | 154 Mpa |
| Charpy Notched Impact Strength | | ISO 179/1eU | 61 KJ/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| viscosity number | | ISO 307 | 108 ml/g |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Traceability Index (CTI) | | IEC 112 | CTI200 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| flammability | | UL 94 | 94V-0 CLASS |
| Heat distortion temperature | | ISO 75-2 | 195 °C |
| melting temperature | | ISO 3146 | 220-225 °C |
| Mold temperature range | | | 60-90 °C |
| Heat distortion temperature | | ISO 75-2 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices