PC/CF LNP™ STAT-KON™ DC-1003
31
- Properties:Easy to formEasy to demouldFiller: Carbon fiber rein
- Usages:Plastic bagElectronic and Electrical Applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183,ASTMD792 | 1.24 g/cm³ | |
| Flow: 24 hours | ASTMD955 | 0.040到0.10 % | |
| Lateral flow: 24 hours | ASTMD955 | 0.30到0.40 % | |
| Vertical flow direction: 24 hours | ISO294-4 | 0.32到0.41 % | |
| Flow direction: 24 hours | ISO294-4 | 0.040到0.13 % | |
| Flow: 24 hours | ASTMD955 | 0.040到0.10 % | |
| Lateral flow: 24 hours | ASTMD955 | 0.30到0.40 % | |
| Vertical flow direction: 24 hours | ISO294-4 | 0.32到0.41 % | |
| Flow direction: 24 hours | ISO294-4 | 0.040到0.13 % | |
| Water absorption rate | ASTMD570 | 0.16 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| fracture | ASTMD638 | 2.1 % | |
| ISO527-2 | 2.0 % | ||
| --1 | ASTMD638 | 8780 Mpa | |
| fracture | ASTMD638 | 110 Mpa | |
| ISO527-2 | 109 Mpa | ||
| ASTMD638 | 2.1 % | ||
| ISO527-2 | 2.0 % | ||
| --1 | ASTMD638 | 8780 Mpa | |
| fracture | ASTMD638 | 110 Mpa | |
| ISO527-2 | 109 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 23°C | ASTMD256 | 74 J/m | |
| 23°C2 | ISO180/1A | 6.4 kJ/m² | |
| 23°C | ASTMD4812 | 490 J/m | |
| 23°C3 | ISO180/1U | 33 kJ/m² | |
| 23°C | ASTMD256 | 74 J/m | |
| 23°C2 | ISO180/1A | 6.4 kJ/m² | |
| 23°C | ASTMD4812 | 490 J/m | |
| 23°C3 | ISO180/1U | 33 kJ/m² | |
| 23°C,EnergyatPeakLoad | ASTMD3763 | 15.5 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 10到1.0E+5 ohms | |
| ASTMD257 | 10到1.0E+5 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 0.45MPa, Unanealed, 3.20mm | ASTMD648 | 145 °C | |
| 1.8MPa, Unanealed, 3.20mm | ASTMD648 | 137 °C | |
| 1.8MPa, Unanealed, 64.0mm span 4 | ISO75-2/Af | 146 °C | |
| ASTME831,ISO11359-2 | 1.8E-05 cm/cm/°C | ||
| ASTME831,ISO11359-2 | 5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top