PA66 2701TB
8
- Properties:2701TB
CompareTechnical Data Sheet
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527 | -- GPa | |
| Impact strength of cantilever beam gap | ISO 180 | -- kJ/m² | |
| bending strength | ISO 178 | 88.5 Mpa | |
| tensile strength | ISO 527 | 67.7 Mpa | |
| elongation at break | ISO 527 | 17.7 % | |
| Flexural modulus | ISO 178 | 2.1 GPa | |
| Impact strength of simply supported beam without notch | ISO 179 | 不断 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179 | 11.2 kJ/m² |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | - | -- % | |
| - | -- % | ||
| density | ISO 1183 | -- g/cm³ | |
| Water absorption rate | ISO 62 | -- % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | IEC 93 | -- Ω.cm | |
| dielectric strength | IEC 243 | -- KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 3146 | -- °C | |
| melt mass-flow rate | ISO 1133 | -- g/10min | |
| Linear coefficient of thermal expansion | ISO 11359 | -- 10-5k | |
| Heat distortion temperature | ISO 75 | -- °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top