PA6 1010GN2-30 MITSUBISHI ENGINEERING JAPAN

Form：Granules | Grade：Injection grade

Properties:

enhanceGlass fiber reinforcedFlame retardantGlass reinforcementFlame retardant

Typical Applications:

Electronic and Electrical Applications

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electronic and Electrical Applications
Properties:	enhance \| Glass fiber reinforced \| Flame retardant \| Glass reinforcement \| Flame retardant

Certificates

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		D790	9.16(5.10)	GPa
Impact strength of cantilever beam gap	1/2寸	D256	54(160)	J/m
	Impact strength of cantilever beam gap	1/2寸	D256	5.5(16)	Kgf.cm/cm
		Impact strength of cantilever beam gap	1/8寸	D256	68(290)	J/m
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	1/8寸	D256	6.9(30)	Kgf.cm/cm
tensile strength		D638	140(88)	Mpa
tensile strength	tensile strength		D638	1400(900)	Kgf/cm
Stretching length		D638	5(7)	%
bending strength		D790	185(98)	Mpa
bending strength	bending strength		D790	1890(1000)	Kgf/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	D648	219	°C
Linear coefficient of thermal expansion		D696	4
UL flame retardant rating		UL 94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		D570	2.5	%
Rockwell hardness		D785	120(115)	R
Taber wear resistance		D1044	15	mg/1000cy
Friction coefficient		D1894	0.35
Shrinkage rate			0.2/0.4	MD%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength		D149	15(15)	MV/m
Dielectric constant		D150	35-53(88)	Pf/m
Dielectric loss	Tangent	D150	0.02(0.1)
Arc resistance		℃	120-130	S

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top