PP Homopolymer Retpol® PDR 1043 HS POLYPACIFIC AUSTRALIA
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.24 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 18 g/10min | |
| Shrinkage rate | ASTM D955 | 0.70to0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 105 | |
| Shore hardness | ASTM D2240 | 81 | |
| ASTM D2240 | 75 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 4670 MPa | |
| tensile strength | ASTM D638 | 35.0 MPa | |
| elongation | ASTM D638 | 4.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 17 J/m | |
| Suspended wall beam without notch impact strength | ASTM D256 | 190 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 148 °C | |
| ASTM D648 | 102 °C | ||
| Linear coefficient of thermal expansion | ASTM D696 | 6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top