
PBT 2100 TAIWAN CHANGCHUN
125
Form:Granules | Grade:Flame retardant grade
Properties:
Flame retardant
Typical Applications:
Automotive sector
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Automotive sector |
| Properties: | Flame retardant |
Certificates

Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.05 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | ASTM D-785 | 88 | M-scale | |
| Elongation at Break | ASTM D-638 | 4-6 | % | |
| Impact strength of cantilever beam gap | ASTM D-256 | 2.5-3.5 | kg.cm/cm | |
| Bending modulus | ASTM D-790 | 25000-35000 | kg/cm | |
| bending strength | ASTM D-790 | 900-1200 | kg/cm | |
| tensile strength | ASTM D-638 | 500-700 | kg/cm | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 2.5-3.5 | kg·cm/cm(J/M)ft·lb/in | |
| tensile strength | ASTM D638/ISO 527 | 700 | kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 88 | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 18.6Kg/cm | ASTM D-648 | 65 | °C |
| Flame resistance | 0.75mm | UL 94 | V-0 | |
| Hot deformation temperature | 4.6Kg/cm | ASTM D-648 | 165 | °C |
| Melting temperature | DSC | 225 | °C | |
| Linear coefficient of thermal expansion | ASTM D-696 | 9 | ||
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 65 | ℃(℉) |
| HDT | ASTM D648/ISO 75 | 165 | ℃(℉) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Fiberglass content | Ash | 0 | % | |
| Shrinkage rate | ASTM D-955 | 1.3-2.0 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | ASTM D-257 | >10 | Ω | |
| Dielectric constant | 60Hz | ASTM D-150 | 3.2 | |
| Arc resistance | ASTM D-495 | 120 | sec | |
| Volume resistivity | ASTM D-257 | >10 | Ω.cm | |
| Induced positive connection | 60Hz | ASTM D-150 | 0.001 | |
| Dielectric strength | ASTM D-149 | 18 | KV/mm | |
| Surface resistivity | ASTM D257/IEC 60093 | >10 | Ω | |
| Dielectric constant | ASTM D150/IEC 60250 | 302 | ||
| ASTM D150/IEC 60250 | 0.001 | |||
| Arc resistance | ASTM D495/IEC 60112 | 120 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.