PBT T06 204 SN DSM Additive Manufacturing

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂	kJ/m²
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.00	kJ/m²
Tensile modulus	23°C	ISO 527-2	3200	MPa
Elongation at Break	23°C	ISO 527-2	5.00	%
tensile strength	23°C	ISO 527-2	65	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD	ISO 11359-2	9E-05	cm/cm／°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD	ISO 11359-2	9E-05	cm/cm／°C
Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	75	°C
Hot deformation temperature	Hot deformation temperature	0.45MPaUnannealed	ISO 75-2/Bf	165	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	(Equilibrium,23°C,50%RH)	ISO 62	0.18	%
Water absorption rate	Water absorption rate	(Saturation,23°C)	ISO 62	0.45	%
density		ISO 1183	1.44	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	相对漏电起痕指数	IEC 60112	225	V
Volume resistivity		IEC 60093	>1.0E+15	Ω.cm
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	V-0	3.00mm
UL flame retardant rating	UL flame retardant rating		UL -94	V-0	0.75mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top