LDPE DOW™ PG 7008
51
- Properties:Product trademark DOW
- Usages:For injection molding grade
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 0.916 g/cm | |
| melt mass-flow rate | ASTM D-1238 | 7.5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Yield tensile strength | ASTM D-638 | 9.00 Mpa | |
| Tensile strength at break | ASTM D-638 | 10.00 Mpa | |
| elongation | ASTM D-638 | 350 % | |
| Flexural modulus | ASTM D-790 | 200 Mpa | |
| Tensile impact strength | ASTM D-1822 | 145 KJ/m | |
| hardness | ASTM D-2240 | 50 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental stress cracking resistance | ASTM D-1693 | 9.20 hr |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 89.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top