PP Galloo GP-PP-620 Galloo Plastics S.A.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 内部方法 | 0.900to0.940 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 5.0to9.0 g/10min | |
| density | 内部方法 | 0.900to0.940 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 5.0to9.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | >50 | |
| ISO 868 | >50 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ISO 527-2 | >16.0 MPa |
| Break | ISO 527-2 | >12.0 MPa | |
| Tensile strain | Break | ISO 527-2 | >50 % |
| Flexural modulus | ISO 178 | 700 MPa | |
| tensile strength | Yield | ISO 527-2 | >16.0 MPa |
| Break | ISO 527-2 | >12.0 MPa | |
| Tensile strain | Break | ISO 527-2 | >50 % |
| Flexural modulus | ISO 178 | 700 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | >15 kJ/m² | |
| ISO 180 | >15 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top