PFA TEFLON® 940HP PLUS

Properties:
High purity
Low friction coefficient
Low moisture absorption
Low smoke level
Resistance to stress crac
Electrical performance
Good flexibility
High mobility
Chemical resistance
Weather resistance
Moderate heat resistance
Thermal stability
High toughness
translucent
Usages:
Lining
Pipe fittings
Liquid handling
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTMD3307	16 g/10min
melt mass-flow rate	melt mass-flow rate		ISO12086	16 g/10min
Water absorption rate		ASTMD570	<0.030 %

hardness	Test Condition	Test Method	Test Result
		ASTMD2240	55
			ISO868	55

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating 3		UL94	V-0
Limiting Oxygen Index		ASTMD2863	>95 %
Limiting Oxygen Index	Limiting Oxygen Index		ISO4589-2	>95 %

Supplementary Information	Test Condition	Test Method	Test Result
CriticalShearRate			56.0 sec^-1
MITFoldingEndurance4		ASTMD2176	3E+05 cycles

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTMD3307	28.0 Mpa
Flexural modulus		ISO178	60.0 Mpa
tensile strength		ASTMD3307	11.0 Mpa
Tensile stress		ISO12086	28.0 Mpa
Tensile stress	Tensile stress		ISO12086	11.0 Mpa
elongation		ASTMD3307	310 %
elongation	elongation		ASTMD3307	450 %
Tensile strain		ISO12086	310 %
Tensile strain	Tensile strain		ISO12086	450 %
Flexural modulus		ASTMD790	650 Mpa
	Flexural modulus		ASTMD790	60.0 Mpa
	Flexural modulus	Flexural modulus		ISO178	650 Mpa

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor		ASTMD150	<2.0E-4
Dissipation Factor	Dissipation Factor		IEC60250	<2.0E-4
Volume resistivity		ASTMD257	1E+18 ohms·cm
Volume resistivity	Volume resistivity		ISO1325	1E+18 ohms·cm
Dielectric strength 2		ASTMD149	80 KV/mm
Electrical strength		IEC60243-1	80 KV/mm
dielectric constant		ASTMD150	2.03
dielectric constant	dielectric constant		IEC60250	2.03

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ASTMD4591	290 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top