PP TM-20

Properties:
Universal injection molding transparent grade special material with good impact resistance and flow performance
excellent model performance
and good dimensional stability
Usages:
Suitable for transparent products such as packaging boxes
containers
electrical appliances
etc
Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	18 g/10min

Mechanical properties	Test Method	Test Result
Transmittance		87%
Flexural modulus	ASTM D-796	1.66 GPa
tensile strength	ASTM D-256	35.7 MPa
Notch impact strength	ASTM D-256	30 j/m

Thermal performance	Test Condition	Test Method	Test Result
combustibility		UL 94	HB 1.7mm
		ASTM D-256	120(455KPa)

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top