Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.908 g/cm³ |
| melt mass-flow rate | | ASTM D1238 | 6.0 g/10min |
| Shrinkage rate | | | 0.30 % |
| Shrinkage rate | | | 0.50 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 50 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | 内部方法 | 87.0 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Adhesion to PC | | 内部方法 | 4.00 kgf/25mm |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D412 | 6.86 MPa |
| elongation | Break | ASTM D412 | 500 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | | -50.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare