PET Sunny® PET EN230

Properties:
Filler
glass fiber reinforced material
30%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.65 g/cm³
density	density		ISO 1183	1.65 g/cm³
Shrinkage rate		ASTM D955	0.30to0.60 %
Shrinkage rate	Shrinkage rate		ISO 294-4	0.30to0.60 %
Water absorption rate		ASTM D570	0.10 %
Water absorption rate	Water absorption rate		ISO 62	0.10 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	V-0
UL flame retardant rating	UL flame retardant rating		UL 94	V-0

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus		ISO 178	6000 MPa
bending strength		ASTM D790	145 MPa
bending strength	bending strength		ISO 178	150 MPa
Flexural modulus		ASTM D790	5820 MPa
tensile strength		ASTM D638	100 MPa
tensile strength	tensile strength		ISO 527-2/5	100 MPa
elongation		ASTM D638	1.9 %
elongation	elongation	Break	ISO 527-2/5	2.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	64 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180/1A	6.0 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTMD648	220 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top