HDPE SF 5007
0
- Usages:Liningbagsindustrial applicationsfilmspackaging
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD1505 | 0.950 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.050 g/10min | |
| ASTMD1238 | 15 g/10min | ||
| Resistance to environmental stress cracking | ASTMD1693 | >500 hr |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ImpactStrength-BlownFilm | ASTMD3420 | 34.3 J/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTMD790 | 1100 MPa |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTMD882 | 700 % | |
| ElmendorfTearStrength | ASTMD1922 | 6.9 kN/m | |
| ASTMD1922 | 147.1 kN/m | ||
| Falling hammer impact | ASTMD1709 | 130 g | |
| Film thickness - tested | 20 µm | ||
| Elastic modulus MD | ASTMD882 | 850 MPa | |
| Elastic modulus TD | ASTMD882 | 1050 MPa | |
| tensile strength | ASTMD882 | 100 MPa | |
| ASTMD882 | 55.0 MPa | ||
| elongation | ASTMD882 | 500 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTMD746 | <-70.0 °C | |
| vicat | ASTMD1525 | 127 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top