Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Linear forming shrinkage rate | | ASTM D-955 | 0.001 mm/mm |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-792 | 1.52 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D-790 | 8000 MPa |
| Tensile strength at break | | ASTM D-638 | 158 MPa |
| elongation | Break | ASTM D-638 | 3 % |
| Rockwell hardness | | | 120 |
| Impact strength of cantilever beam gap | | ASTM D-250 | 8.0 KJ/m |
| | ASTM D-790 | 195 MPa |
| Other performance | Test Condition | Test Method | Test Result |
|---|
| filler | | | GF30 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D-149 | 17 KV/mm |
| Surface Resistivity | | ASTM D-257 | 10 Ω |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTM D-648 | 215 ℃ |
| Flame retardancy | | UL 94 | V0 |
| melting point | | | 220 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare