POM W2320 003 BK120 BASF GERMANY

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceenhance

Typical Applications:

Automotive ApplicationsToy

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| Toy
Properties:	High impact resistance \| enhance

Certificates

No Data...

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result	Test Unit
Processing temperature			374-446	℉
Mold temperature			140-212	℉
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	73℉	ISO 527-1	399000	psi
Tensile stress	73℉	ISO 527-1	9280	psi
Tensile strain	73℉，Yield	ISO 527-1	7.5	%
Tensile strain	Tensile strain	73℉，Break	ISO 527-1	24	%
Tensile creep modulus	1000h	ISO 899-1	196000	psi
Charpy Notched Impact Strength	-22℉	ISO 179	2.14	ft·lb/in
Charpy Notched Impact Strength	Charpy Notched Impact Strength	73℉	ISO 179	2.14	ft·lb/in
Impact strength of simply supported beam without notch	-22℉	ISO 179	71.4	ft·lb/in
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	73℉	ISO 179	76.1	ft·lb/in
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.80MPa	ISO 75A-1	203	℉
UL flame retardant rating		UL 94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23C/50RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+15	ohm·cm
Dielectric loss	1E+6HZ，73℉	IEC 60250	0.00500

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top