EVA UE659
0
- Usages:Compression molding foam hot melt adhesive
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 2 g/10min | |
| density | ASTM D-1505 | 0.947 g/cm3 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| VA content | USIFE | 25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | ASTM D-2240 | 31 Shore D | |
| ductility | ASTM D-638（ASTM D-882） | 890 % | |
| ASTM D-638（ASTM D-882） | 236 % | ||
| ASTM D-638（ASTM D-882） | 290 % | ||
| ASTM D-638（ASTM D-882） | 680 % | ||
| Low temperature brittleness | ASTM D-746 | ＜-76 ℃/F50 | |
| Impact Strength | ASTM D-1709 | 444 G/F50 | |
| Tensile strength at the point of surrender | ASTM D-638（ASTM D-882） | 212 KG/cm2 | |
| ASTM D-638（ASTM D-882） | 114 KG/cm2 | ||
| ASTM D-638（ASTM D-882） | 259 KG/cm2 | ||
| ASTM D-638（ASTM D-882） | 240 KG/cm2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 54 ℃ | |
| melting point | ASTM D-2117 | 77 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top