PP GLS PP ZG29
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.40到0.80 % | |
| density | ASTMD792 | 0.970到0.980 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 4.0到8.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 38.0到42.0 MPa |
| elongation | Break | ASTMD638 | >7.0 % |
| Flexural modulus | ASTMD790 | 2000到2500 MPa | |
| bending strength | ASTMD790 | 50.0到56.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 80到100 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 92.0到95.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top