TPE E3365
0
- Properties:Good wear resistancetear resistance and tensile strengthhigh surface dampingbut not stickygood surface finishgood phase meltingcan melt with PPPSPAABSPCetc.has good toughening effectgood memory resilience functiongood toughening effectspecific water resistanceethanol resistanceacid alkali resistancenon fuel resistancemechanical scratch resistanceand sometimes even sharp external forces
- Usages:Replacing siliconebaby and child productsmedical tubeshygiene productsmechanical casterssportstoyselectrical plugspliershammersknives and other plastic covershousehold appliance corrugated pipesanti slip seat cushionssealing padsetc
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 1.7 % |
| processability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| mold temperature | 170-260 ℃ | ||
| Usage temperature | -30~+120 ℃ |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 6.0 g/10min | ||
| density | 0.90 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 7.0 MPa | ||
| elongation | 700.0 % | ||
| hardness | 65.0 SHA |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top