PC DMX1435-GY6E563T SABIC INNOVATIVE US

Form：Granules

Properties:

Scratch resistantHigh temperature resistanhigh strength

Typical Applications:

Electronic and electrical componentsAutomotive componentsWire and cable

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and electrical components \| Automotive components \| Wire and cable
Properties:	Scratch resistant \| High temperature resistan \| high strength

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	2540pm	ASTM DI 003	88	%
turbidity	2540Pm	ASTM D1003	0.8	%
Refractive index		ASTM D542	1.584
Refractive index	Refractive index		ISO 489	1.584
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	50mm/min	ASTM D638	2900	Mpa
Tensile modulus	Tensile modulus	1.0mm/min	ISO 527	2450	Mpa
tensile strength	Yield50mm/min I型	ASTM D638	80	Mpa
	tensile strength	Break50mm/mini型	ASTM D638	65	Mpa
		tensile strength	Yield50mm/min	ISO 527	80	Mpa
		tensile strength	tensile strength	斯裂50mm/min	ISO 527	60	Mpa
elongation	Yield50mm/min iI型	ASTM D638	7	%
	elongation	Break50mm/min I型	ASTM D638	70	%
		elongation	Yield50mm/min	ISO 527	7	%
		elongation	elongation	Break50mm/min	ISO 527	40	%
bending strength	Yield1.3mm/min	ASTM D790	120	Mpa
bending strength	bending strength	Yield2.0mm/min	ISO 178	108	Mpa
Bending modulus	1.3mm/min	ASTM D790	2600	Mpa
Bending modulus	Bending modulus	2.0mm/min	ISO 178	2450	Mpa
Impact strength of cantilever beam gap	23℃	ASTM D256	30	J/m
	Impact strength of cantilever beam gap	-30℃	ASTM D256	30	J/m
		Impact strength of cantilever beam gap	23°C 3.0mm A型Notched	ISO 180	5	kJ/m²
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	“-30℃ 3.0mm A型Notched	ISO 180	4	kJ/m²
Suspended wall beam without notch impact strength	23℃	ASTM D4812	NB	J/m
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C 3.0mm	ISO 180	NB	kJ/m²
Impact strength of cantilever beam gap	-30℃ 3.0mm	ISO 180	45	kJ/m²
Charpy Notched Impact Strength	23°C3.0mm 1eA型	ISO 179	3	kJ/m²
	Charpy Notched Impact Strength	30℃ 3.0mm 1eA型^	ISO 179	3	kJ/m²
		Charpy Notched Impact Strength	23°C 3.0mm	ISO 179	NB	kJ/m²
		Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30℃ 3.0mm	ISO 179	47	kJ/m²
Taber wear resistance	CS-17轮1kg	ASTM D1044	10	mg/1000cy
Taiberten loss	CS-17轮1kg	内部测试方法	10	mg/1000cy
Erichsen scratch depth	6N	内部测试方法	14	micrometer
Instrumented impact	23℃总能量	ASTM D3763	30	J
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Unannealed0.45MPa 3.2mm	ASTM D648	133	°C
	Hot deformation temperature	Unannealed1.8MPa 3.2mm	ASTM D648	119	°C
		Hot deformation temperature	0.45MPa 4.0mm	ISO 75	131	°C
		Hot deformation temperature	Hot deformation temperature	1.8MPa 4.0mm	ISO 75	118	°C
Vicat softening temperature	50℃/hr 50N	ASTM DI 525	139	°C
	Vicat softening temperature	50℃/hr 50N	ISO 306	138	°C
	Vicat softening temperature	Vicat softening temperature	120℃/hr 50N	ISO 306	140	°C
Linear expansion coefficient flow	-40.0~95℃	ASTM E831	0.000070	cm/cm/℃
Vertical expansion coefficient	-40.0~95℃	ASTM E831	0.000070	cm/cm/℃
Linear coefficient of thermal expansion	Flow23~80℃	ISO 11359	0.000070	cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直23~80℃	ISO 11359	0.000070	cm/cm/℃
thermal conductivity		ASTM C177	0.2	w/(m.℃)
thermal conductivity	thermal conductivity		ISO 8302	0.2	w/(m.℃)
specific heat		ASTM C351	1.4	J/(g.℃)
Ball indentation test		IEC 60695	125	°C
Ball indentation test	Ball indentation test		IEC 60695	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.2	g/cm³
density	density		ISO 1183	1.17	g/cm³
Shrinkage rate	Flow3.2mm	内部测试方法	0.5-0.8	%
Water absorption rate	24hr	ASTM D570	0.08	%
	Water absorption rate	23℃Equilibrium	ASTM D570	0.28	%
		Water absorption rate	50RHEquilibrium	ASTM D570	0.13	%
			Water absorption rate	50RH 24hr	ASTM D570	0.04	%
				Water absorption rate	23℃Saturation	ISO 62	0.27	%
				Water absorption rate	Water absorption rate	23℃ 50RH	ISO 62	0.13	%
melt mass-flow rate	300℃ 1.2kg	ASTM D1238	14.5	g/10min
melt mass-flow rate	melt mass-flow rate	300℃ 1.2kg	ISO 1133	13	cm3/10min
Bi Rong		ASTM D792	0.85	cm³/g
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	L标尺	ASTM D785	108
Rockwell hardness	Rockwell hardness	M标尺	ASTM D785	93
Pencil hardness	1.0kg	ASTM D3363	H
Ball Pressure Test	H358/30	ISO 2039	128	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top