PLA Ingeo™ 3052D（粉）
88
- Properties:HighlightcrystallizationcompostableUpdatable resourcesHigh clarityBiodegradableFood contact compliance
- Usages:Outdoor applicationsDisposable tableware
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.24 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 14 g/10min | |
| Shrinkage rate | 0.30 - 0.50 % | ||
| relative viscosity | 3.3 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transparency | Transparent |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 62.1 Mpa | |
| Tensile strain | ASTM D638 | 3.5 % | |
| Flexural modulus | ASTM D790 | 3550 Mpa | |
| bending strength | ASTM D790 | 108 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 16 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Transition Temperature | ASTM D3418 | 55.0 to 60.0 °C | |
| Crystallization peak temperature | ASTM D3418 | 145 to 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top