Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO 294-4 | 0.93 % |
| Shrinkage rate | | ISO 294-4 | 0.40 % |
| Water absorption rate | | ISO 62 | 6.5 % |
| Water absorption rate | | ISO 62 | 1.9 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Flammability level | | IEC 60695-11-10, -20 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 7500 Mpa |
| Tensile stress | | ISO 527-2 | 110 Mpa |
| Tensile strain | | ISO 527-2 | 2.3 % |
| Flexural modulus | | ISO 178 | 6500 Mpa |
| Bending stress | | ISO 178 | 165 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 30 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 35 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | -- ohms |
| Volume resistivity | | IEC 60093 | 1.0E+14 ohms·cm |
| | IEC 60250 | 3.50 |
| | IEC 60250 | 3.30 |
| Dissipation Factor | | IEC 60250 | 5.0E-3 |
| Dissipation Factor | | IEC 60250 | 0.014 |
| CTI | | IEC 60112 | 500 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/B | 210 °C |
| | ISO 75-2/A | 180 °C |
| Melting temperature 2 | | ISO 11357-3 | 220 °C |
| | ISO 11359-2 | 3.5E-5 cm/cm/°C |
| | ISO 11359-2 | 6.0E-5 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices