PA66 408HS DUPONT USA

100

Form：Granules | Grade：Special level

Properties:

enhanceTougheningThermal stabilityHigh impact resistanceHigh temperature resistan

Typical Applications:

Industrial machineryAutomotive sector

Supplier(2)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Industrial machinery \| Automotive sector
Properties:	enhance \| Toughening \| Thermal stability \| High impact resistance \| High temperature resistan

Certificates

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			注塑级.良好的热稳定性
Other performance	Test Condition	Test Method	Test Result	Test Unit
Limiting Oxygen Index (LOI)		ASTM D-2863	DAM｜19	%
Limiting Oxygen Index (LOI)	Limiting Oxygen Index (LOI)		ASTM D-2863	50%RH｜20	%
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Saturation(23℃)	ASTM D-570	50%RH｜-	%
	Water absorption rate	Saturation(23℃)	ASTM D-570	DAM｜7.0	%
		Water absorption rate	24hr浸渍(23℃)	ASTM D-570	50%RH｜-	%
		Water absorption rate	Water absorption rate	24hr浸渍(23℃)	ASTM D-570	DAM｜1.2	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Elongation at Break	23℃	ASTM D-638	DAM｜80	%
Elongation at Break	Elongation at Break	23℃	ASTM D-638	50%RH｜270	%
tensile strength	23℃	ASTM D-638	DAM｜62.1	Mpa
Impact strength of cantilever beam gap	短试样23℃	ASTM D-1822	50%RH｜265	kJ/m²
	Impact strength of cantilever beam gap	短试样23℃	ASTM D-1822	DAM｜189	kJ/m²
		Impact strength of cantilever beam gap	长试样23℃	ASTM D-1822	50%RH｜1680	kJ/m²
		Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	长试样23℃	ASTM D-1822	DAM｜550	kJ/m²
tensile strength	23℃，Yield		50%RH｜51.7	Mpa
tensile strength	tensile strength	23℃，Yield		DAM｜60.7	Mpa
elongation at yield		ASTM D-638	50%RH｜15	%
elongation at yield	elongation at yield		ASTM D-638	DAM｜5	%
Hardness (Rockwell R)		ASTM D-785	50%RH｜R102
elongation		ASTM D638/ISO 527	60.7	%
tensile strength		ASTM D638/ISO 527	62.1	kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	80	%
Rubbing modulus	23℃	ASTM D-790	DAM｜1965	Mpa
Rubbing modulus	Rubbing modulus	23℃	ASTM D-790	50%RH｜1103	Mpa
Hardness (Rockwell M)		ASTM D-785	DAM｜M71
Hardness (Rockwell M)	Hardness (Rockwell M)		ASTM D-785	50%RH｜M50
Impact strength of cantilever beam gap	23℃	ASTM D-256	DAM｜230	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23℃	ASTM D-256	50%RH｜240	J/m
Shore hardness		ASTM D-676	DAM｜83
Shore hardness	Shore hardness		ASTM D-676	50%RH｜76
Hardness (Rockwell R)		ASTM D-785	DAM｜R115
tensile strength	23℃	ASTM D-638	50%RH｜51.7	Mpa
tensile strength	tensile strength	Yield	ASTM D638	62.7	Mpa
Bending modulus		ASTM D790	2070	Mpa
Elongation at Break		ASTM D638	50	%
Impact strength of cantilever beam gap		ASTM D256	134	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	7×10-5	mm/mm.℃
Melting temperature			255	℃（℉）
Hot deformation temperature	(0.5)×106Pa	ASTM D-648	DAM｜230	°C
Hot deformation temperature	Hot deformation temperature	(0.5)×106Pa	ASTM D-648	50%RH｜-	°C
UL flame retardant rating		UL 94	DAM｜94
UL flame retardant rating	UL flame retardant rating		UL 94	50%RH｜HB
Melting temperature		ASTM D-2177	DAM｜270	°C
Melting temperature	Melting temperature		ASTM D-2177	50%RH｜-	°C
Linear coefficient of thermal expansion		ASTM D-696	DAM｜7×10-5	m/m/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTM D-696	50%RH｜-	m/m/℃
Load deformation	13.8MPa，50℃	ASTM D-621	DAM｜1.4	%
Load deformation	Load deformation	13.8MPa，50℃	ASTM D-621	50%RH｜-	%
Melting temperature	Fisher Johns法	ASTM D-789	255	°C
Melting temperature	Melting temperature	Fisher Johns法	ASTM D-789	255	°C
Hot deformation temperature	18×106Pa	ASTM D-648	DAM｜75	°C
Hot deformation temperature	Hot deformation temperature	18×106Pa	ASTM D-648	50%RH｜-	°C
Brittle temperature		ASTM D-746	DAM｜-104	°C
Brittle temperature	Brittle temperature		ASTM D-746	50%RH｜-84	°C
Hot deformation temperature	66 psi， Unannealed	ASTM D648	184	°C
Linear coefficient of thermal expansion	平行Flow	ASTM E831	0.00010	cm/cm/ ℃
UL flame retardant rating		UL 94	HB
Extreme Oxygen Index		ASTM D2863	23	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D570/ISO 62	1.2	%
density		ASTM D792/ISO 1183	1.09
Water absorption rate	24hr	ASTM D570	1.2	%
Water absorption rate	Water absorption rate	Saturation	ASTM D570	7.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257/IEC 60093	10	Ω.cm
Dielectric constant		ASTM D150/IEC 60250	3.1
Volume resistivity		ASTM D-257	DAM｜1013	Ω.m
Volume resistivity	Volume resistivity		ASTM D-257	50%RH｜1013	Ω.m
Dielectric constant	103Hz(cps)	ASTM D-150	DAM｜3.1
Dissipation factor	103Hz(cps)	ASTM D-150	50%RH｜0.11
Dielectric constant	106Hz(cps)	ASTM D-150	50%RH｜3.3
Dissipation factor	106Hz(cps)	ASTM D-150	50%RH｜0.10
Dielectric constant	106Hz(cps)	ASTM D-150	DAM｜2.9
Dissipation factor	106Hz(cps)	ASTM D-150	DAM｜0.02
Dielectric constant	100Hz(cps)	ASTM D-150	50%RH｜4.8
Dissipation factor	100Hz(cps)	ASTM D-150	DAM｜0.02
	Dissipation factor	100Hz(cps)	ASTM D-150	50%RH｜0.1
	Dissipation factor	Dissipation factor	103Hz(cps)	ASTM D-150	DAM｜0.02

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PA66 408HS DUPONT USA

Product Description

Certificates

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index