
ETFE AH-3000 AGC JAPAN
186
Form:Granules | Grade:Conductive grade
Properties:
AntichemicalGood adhesionConductive
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Antichemical | Good adhesion | Conductive |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 无断裂 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ASTM D790 | 1240 | Mpa | |
| elongation | Break | ASTM D638 | 350 | % |
| tensile strength | ASTM D638 | 35.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Melting temperature | DSC | 240 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | 297°C/5.0kg | ASTM D3159 | 25 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | 1E+03 | ohms | ||
| film | Test Condition | Test Method | Test Result | Test Unit |
| Penetration | 60°C | Internal Method | 2.0 | g·mm/m²/atm/24hr |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.