Rubber Precision Polymer A75H
0
CompareTechnical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IRHD hardness | ASTMD1415 | 75 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Low temperature resistance | ASTM D2137 | -5 °C | |
| ISO 2921 | 2 °C | ||
| ISO R812 | -5 °C | ||
| ASTM D1329 | 2 °C |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD412 | 21.4 MPa |
| elongation | Break | ASTMD412 | 180 % |
| compression set | ASTM D395B | 28 % | |
| ISO 815 | 28 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength in air | ASTMD412 | -6.0 % | |
| Change rate of ultimate elongation in air | ASTMD412 | 18 % | |
| Change rate of IRHD hardness in the air | ASTMD573 | 1.0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| maximum service temperature | 290 °C | ||
| 250 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top