Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.19 g/cm³ |
| Shrinkage rate | | ISO 294-4 | 0.90 % |
| Shrinkage rate | | ISO 294-4 | 0.70 % |
| Water absorption rate | | ISO 62 | 2.0 % |
| Water absorption rate | | ISO 62 | 0.80 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | ISO 1874 | PA612-HI.MH.14-050.GF20 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ISO 527-2/1A | 115 MPa |
| Tensile strain | Yield | ISO 527-2/1A | -- % |
| Tensile strain | Break | ISO 527-2/1A | 5.0 % |
| Tensile modulus | | ISO 527-2/1A | 5700 MPa |
| tensile strength | Yield | ISO 527-2/1A | -- MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 11 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179/1eA | 18 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 110 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 93 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| relative permittivity | | IEC 60250 | 3.10 |
| Dissipation Factor | | IEC 60250 | 0.050 |
| Dissipation Factor | | IEC 60250 | 0.047 |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 0 |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 0 |
| Volume resistivity | | IEC 60093 | 1E+14 ohms·cm |
| relative permittivity | | IEC 60250 | 4.40 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 208 °C |
| Heat distortion temperature | | ISO 75-2/A | 189 °C |
| vicat | | ISO 306/B | 207 °C |
| melting temperature | | ISO 11357-3 | 215 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 7E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare