Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 16 g/10min |
| Shrinkage rate | | ASTMD955 | 0.40 % |
| Shrinkage rate | | ASTMD955 | 0.60 % |
| Water absorption rate | | ASTMD570 | 0.16 % |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 30%玻璃纤维增强，3.0mm阻燃 V0，性能与长春4830相当 |
| colour | | | 本色 |
| purpose | | | 连接器，线圈骨架，散热风扇等 |
| processability | Test Condition | Test Method | Test Result |
|---|
| Dry conditions | | | 120-140℃ 3-4h |
| process temperature | | | 220-250 °C |
| process temperature | | | 250-280 °C |
| process temperature | | | 240-270 °C |
| screw speed | | | <100 rpm |
| Temperature | | | 60-80 °C |
| Melt Temperature | | | 250-280 °C |
| pressure | | | 6-18 Mpa |
| pressure | | | 70-120 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 10500 Mpa |
| tensile strength | | ASTMD638 | 115 Mpa |
| Flexural modulus | | ASTMD790 | 8000 Mpa |
| bending strength | | ASTMD790 | 180 Mpa |
| Izod notch impact strength | | ASTM D256/ISO 179 | 7.5 kg·cm/cm(J/M)ft·lb/in |
| tensile strength | | ASTM D638/ISO 527 | 110 kg/cm²(MPa)[Lb/in²] |
| Flexural modulus | | ASTM D790/ISO 178 | 8000 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 180 kg/cm²(MPa)[Lb/in²] |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 60.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1.3E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 20 KV/mm |
| Volume resistivity | | ASTM D257/IEC 60093 | 1.3*10e16 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.62 |
| melt mass-flow rate | | ASTM D1238/ISO 1133 | 15-25 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 220 °C |
| | ASTMD648 | 208 °C |
| Combustibility (rate) | | UL94 | V0 3.0mm |
| | ASTM D648/ISO 75 | 220 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices