LLDPE Sumitomo PE FS253S
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792A | 0.922 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.2 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTMD2457 | 55 | |
| Haze ratio | ASTMD1003 | 15 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD1894 | 0.080 | ||
| ASTMD1894 | 0.11 |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Secant modulus | ASTMD882 | 205 MPa | |
| ASTMD882 | 255 MPa | ||
| tensile strength | Break | ASTMD882 | 35.0 MPa |
| Tensile strength TD | Break | ASTMD882 | 30.0 MPa |
| elongation | Break | ASTMD882 | 770 % |
| Tensile strain | ASTMD882 | 930 % | |
| Falling hammer impact | ASTMD1709 | 90 g | |
| Elmondov tear strength MD | ASTMD1922 | 130 g | |
| ElmendorfTearStrength-TD | ASTMD1922 | 350 g | |
| BlockingLoad | ASTMD3354 | 14 g |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | DSC | 122 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top