
PA66 GP2301BF LG CHEM KOREA
85
Form:Granules | Grade:Injection grade
Typical Applications:
switchLaptop case
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | switch | Laptop case |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 3.0mm | UL 94 | V-0 | |
| 1.5mm | UL 94 | V-0 | ||
| 0.75mm | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 3.20mm | ASTM D790 | 9810 | Mpa |
| elongation | Break,3.20mm | ASTM D638 | 3.5 | % |
| tensile strength | Break,3.20mm | ASTM D638 | 157 | Mpa |
| bending strength | Yield,3.20mm | ASTM D790 | 245 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Str | 3.0mm | UL 746 | 110110120 | °C |
| RTI Imp | 1.5mm | UL 746 | 110110120 | °C |
| RTI Elec | 0.75mm | UL 746 | 100100120 | °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 | cm/cm/°C |
| Melting temperature | ASTM D3418 | 260 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 250 | °C |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 255 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.60 | % |
| Shrinkage rate | MD:3.20mm | ASTM D955 | 0.40-0.90 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 1MHz | ASTM D150 | 3.00 | |
| Dielectric strength | 1.00mm | ASTM D149 | 22 | KV/mm |
| Volume resistivity | ASTM D257 | 1E+14 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 120 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.