PC LS1-701 SABIC INNOVATIVE NANSHA

Form：Granules | Grade：Injection grade

Properties:

Low temperature resistancUV resistanceThermal stability

Typical Applications:

Electronic and electrical accessoriesAutomotive components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and electrical accessories \| Automotive components
Properties:	Low temperature resistanc \| UV resistance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
transmissivity	2540μm	ASTM D1003	88.0	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D1822	473	kJ/m²
Dart impact	23°C	Internal Method	169	J
Dart impact	Dart impact	23°C,EnergyatPeakLoad	ASTM D3763	62.1	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	Yield,50.0mmSpan	ASTM D790	96.5	Mpa
Bending modulus	50.0mmSpan	ASTM D790	2340	Mpa
elongation	Break	ASTM D638	130	%
tensile strength	Yield	ASTM D638	62.1	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Str		UL 746	125	°C
RTI Imp		UL 746	125	°C
RTI Elec		UL 746	130	°C
Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTM D648	129	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ASTM D1238	18	g/10min
Outdoor applicability		UL 746C	f1
Water absorption rate	24hr	ASTM D570	0.15	%
Shrinkage rate	MD：3.20mm	Internal Method	0.50-0.70	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
High voltage arc tracing rate	HVTR	UL 746	PLC 2
High arc combustion index	HAI	UL 746	PLC 1
Compared to the anti leakage trace index	CTI	UL 746	PLC 2
Hot wire ignition	HWI	UL 746	PLC 4

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top