PP Homopolymer POLYfill PPH B8065 VT1
0
- Properties:Fillermineral filler65%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 8.0 g/10min | |
| Shrinkage rate | ISO 294-4 | 1.1to1.4 % | |
| ISO 294-4 | 1.1to1.4 % | ||
| density | ISO 1183 | 1.86 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 18.0 MPa | |
| Tensile strain | Yield | ISO 527-2 | 5.0 % |
| Flexural modulus | ISO 178 | 3200 MPa | |
| bending strength | ISO 178 | 35.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 2.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature (HDT) | ISO 75-2/B | 145 °C | |
| ISO 75-2/A | 70.0 °C | ||
| vicat | ISO 306/A50 | 150 °C | |
| ISO 306/B50 | 100 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top