
PP FFB120 Ineos Films
Properties:
Fragrance retention aroma moisture resistance moisture resistance optical properties excellent printability good heat sealing wide sealing range thermal adhesion strength compliance with food contact regulations
Typical Applications:
Packaging laminated board food service field film
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Packaging | laminated board | food service field | film |
| Properties: | Fragrance retention | aroma | moisture resistance | moisture resistance | optical properties | excellent printability | good heat sealing | wide sealing range | thermal adhesion strength | compliance with food contact regulations |
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Opacity | BS 4432 | 62 | % | |
| other | Test Condition | Test Method | Test Result | Test Unit |
| Initial sealing temperature | Internal Method | 65.6-146 | ℃ | |
| consumption | Internal Method | 34.2 | m2/kg | |
| film thickness | Internal Method | 120 | ||
| Water vapor permeability | 38℃, 90% RH | ASTM F1770 | 4.5 | g/m2/24 hr |
| Oxygen permeability | 25℃, 0% RH | ASTM F1927 | 19 | cm3·mm/m2/atm/24 hr |
| Sealing emphasis | Internal Method | 0.19 | N/mm | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Friction coefficient | 与自身 - 动态, 快封/快封 | ASTM D1894 | 0.5 | |
| 与自身 - 动态, 丙烯酸/丙烯酸 | ASTM D1894 | 0.25 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD: 129℃, 1分钟 | Internal Method | 6.8 | % |
| MD: 121℃, 1分钟 | Internal Method | 3.6 | % | |
| TD: 129℃, 1分钟 | Internal Method | 0.7 | % | |
| TD: 121℃, 1分钟 | Internal Method | 1.2 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.