TPEE LONGLITE® TPEE 1155-201LL Chang Chun Plastics Co., Ltd. (CCP Group)

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength		ISO 179/1eA	NoBreak
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Bending modulus		ISO 178	200	MPa
Tensile strain	Break	ISO 527-2	560	%
tensile strength	Yield	ISO 527-2	32.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 3146	204	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.40	%
Shrinkage rate		ISO 294-4	0.65	%
melt mass-flow rate	230°C/2.16kg	ISO 1133	20	g/10min
density		ISO 1183	1.20	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric strength	2.00mm	IEC 60243-1	17	kV/mm
Volume resistivity		IEC 60093	2.1E+13	ohms·cm
Surface resistivity		IEC 60093	3.6E+13	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ISO 868	55

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top