PPO WCD835 BK1006 SABIC INNOVATIVE US

Form：Granules

Properties:

Non enhancedLow odor

Typical Applications:

Electronic and Electrical ApplicationsAutomotive components

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electronic and Electrical Applications \| Automotive components
Properties:	Non enhanced \| Low odor

Certificates

No Data...

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			挤出成型
purpose			IT办公
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning wire flammability index	3.0mm	IEC 60695-2-12	850	°C
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	750	°C
VW		CCP METHOD	Pass
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	CCP METHOD	17.0	Mpa
	tensile strength	Break2	ASTM D638	10.0	Mpa
		tensile strength	Break,113°C3	CCP METHOD	18.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/50	10.0	Mpa
elongation	Break	CCP METHOD	270	%
	elongation	Break4	ASTM D638	250	%
	elongation	elongation	Break,113°C3	CCP METHOD	250	%
Tensile strain	Break	ISO 527-2/50	230	%
Bending modulus	100mmSpan	ASTM D790	40.0	Mpa
Bending modulus	Bending modulus		ISO 178	35.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D746	<-40.0	°C
UL temperature rating		CCP METHOD	80	°C
Hot deformation temperature	100°C	CCP METHOD	20	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	250°C/10.0kg	ASTM D1238	6.0	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 0
Volume resistivity		IEC 60093	9E+15	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,30Sec	ASTM D2240	83

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top